Search:
Unfinished actions
Explanation:
A search will be made for actions which are either “untouched”, “in progress”, or “under consideration”.
Example:
Abbreviations
- ASIL = Automotive safety integrity level
- BF = Base failure of a base function
- BFn = Base function of a base structure element
- BSE = Base structure element
- Cl Prc = Classification for process characteristic
- Cl Prd = Classification for product characteristic
- Cl Req = Classification for requirement
- CM = Control method
- DA = Detection action
- DC = Diagnostic coverage
- DSCF = Dangerous safety critical failure
- Er Det = Error detection
- Er Resp = Error response
- F = Failure
- FIT = Failure in time
- Fn = Function
- FSM = Functional safety management
- IE = Inspection equipment
- LF = Latent fault
- LFM = Latent fault metric
- OC = Operating condition
- PA = Preventive action
- PE = Process element
- PFH = Probability of failure per Hour
- PMHF = Probabilistic metric for random hardware failures
- PrcC = Process characteristic
- PrdC = Product characteristic
- QM = Quality method
- QR = Quality rule
- Req = Requirement
- RMR = Risk Matrix Ranking
- RP = Reaction plan
- SE = Structure element
- SE ErDet = Structure element for error detections
- SE ErResp = Structure element for error responses
- SFF = Safe failure fraction
- SG = Safety Goal
- SIL = Safety integrity level
- SM = Organisational-SE for “safety mechanisms”
- SPF = Single point fault
- SPFM = Single point fault metric
- TF = Top failure of a top function
- TFn = Top function at root element
- TS = Test sample
Example A: 
- In the above structure, with the following setting selected when the document was created, are nine preventive actions (PA; Hot-click icon
) and two detection actions (DA; Hot-click icon 
) anchored at various failures. PA1 occurs three times. - In the IQ-Software, each action (when linked with a failure) is assigned a standard deadline status. You can define the default status in the document settings. Deadlines can be assigned five possible states. In this example, all five states are used.
- One of the failures (with actions assigned) is not yet in a failure net. These actions will also be considered in the search.
Search result: 
The results depend on the document setting “Initial state must have a deadline”! The document setting “Initial state must have responsible” does not play a role in this search!
Seven PA’s and one DA, with states: “untouched”, “under consideration” or “in progress” are found in this search. At BF1: PA1 and PA2 (initial state) and PA5, PA9 and PA1 (revision state). At F1: PA10 and at F3: DA8.
Example B: 
- The structure list looks different with the following setting inactive: .
- This significantly affects the hits found in this Quality Rule.
Search results:
With the above setting inactive, only five actions are considered in this search. From these three are hits: Preventive actions PA5, PA9 and PA1.