Search:
Top failures with missing S rating
Explanation:
A search will be performed for top failures which have no S rating assigned
Anmerkung:
- Top failures (TF) are failures which have causes but no effects.
Example:
Abbreviations
- ASIL = Automotive safety integrity level
- BF = Base failure of a base function
- BFn = Base function of a base structure element
- BSE = Base structure element
- Cl Prc = Classification for process characteristic
- Cl Prd = Classification for product characteristic
- Cl Req = Classification for requirement
- CM = Control method
- DA = Detection action
- DC = Diagnostic coverage
- DSCF = Dangerous safety critical failure
- Er Det = Error detection
- Er Resp = Error response
- F = Failure
- FIT = Failure in time
- Fn = Function
- FSM = Functional safety management
- IE = Inspection equipment
- LF = Latent fault
- LFM = Latent fault metric
- OC = Operating condition
- PA = Preventive action
- PE = Process element
- PFH = Probability of failure per Hour
- PMHF = Probabilistic metric for random hardware failures
- PrcC = Process characteristic
- PrdC = Product characteristic
- QM = Quality method
- QR = Quality rule
- Req = Requirement
- RMR = Risk Matrix Ranking
- RP = Reaction plan
- SE = Structure element
- SE ErDet = Structure element for error detections
- SE ErResp = Structure element for error responses
- SFF = Safe failure fraction
- SG = Safety Goal
- SIL = Safety integrity level
- SM = Organisational-SE for “safety mechanisms”
- SPF = Single point fault
- SPFM = Single point fault metric
- TF = Top failure of a top function
- TFn = Top function at root element
- TS = Test sample
- TF1, TF2 and TF3 are three top failures (TF) anchored at the root element in the above structure. You can recognize a TF with the hot-click icon
. - With the structure-list display option “Severity” active, it is possible to see which failures have been assigned an S rating.
- There is a further TF to be found at SE1 A, “F1”. You can see in the following images (Graph Editor & Failure Net Editor) how the failures are linked with each other.
- TF4 is not a TF, even if the name suggests it. TF4 is actually an unlinked single failure, which has neither effects nor causes. Unlinked failures can be identified with the hot-click icon
.
Graph Editor:
Failure Net Editor from viewpoint of TF:
Search result: 
By either viewing the Graph Editor or Failure Net Editor, with the display option “Severity” active, you can see which top failures don’t have S ratings assigned: TF1 and F1 are both hits in this Quality Rule search.